PV 14 USB Effects hookup

This forum is for talking about all types of AA mixers.
Post Reply
New Member
Posts: 1
Joined: Wed Aug 05, 2015 10:06 pm

PV 14 USB Effects hookup

Post by jorgezavaleta » Wed Aug 05, 2015 10:17 pm


I just bought a PV 14 USB but I´m a little confused. In other mixers, there is an "Effects (EFX) Send" and a "Effects Return" channel. In the PV 14 there is only a "EFX Send" channel. How do send the signal back to the mixer? I will really appreciate if you can add a simple diagram.

Thanks a lot!

Posts: 123
Joined: Thu Feb 07, 2013 8:40 am

Re: PV 14 USB Effects hookup

Post by scott.dickey » Thu Aug 06, 2015 8:24 am

Hi jorgezavaleta,

The PV 14 USB does have an EFX Return knob. It is located next to the knob that controls the EFX type. Here is a screenshot from the manual.
efx return.PNG
efx return.PNG (70.36 KiB) Viewed 4692 times
18 - EFX Return
Once the input level is set, use the EFX Return control to mix the effects processor output into the main left/right outputs.
Scott Dickey
Peavey Embedded Software Engineer

Post Reply