3 years (and counting!) since an update?
Moderators: Michael Ljunggren, ReValver Support Team
3 years (and counting!) since an update?
The last updated version of Revalver came out on August 30th, 2016 (160830)...?
So what's going on guys? Are we ever going to see some enhancements to this product again?
So what's going on guys? Are we ever going to see some enhancements to this product again?
Last edited by Bill0287 on Tue Jul 23, 2019 10:38 am, edited 3 times in total.
Re: Almost 2 years since an update?
Yes, any infomation about Revalver4's development?
Re: Almost 2 years since an update?
I think it's going to take a little more than "BUMP" to bring this one back from the dead.
Try 50,000 Volts, a couple of jump leads and the assistance of a certain Dr Frankenstein !
Sadly the Revalver situation is yet another reflection of the general Peavey ethos which goes something like this.
Develop a good product with lots of potential, market it poorly, update it's software / firmware a couple of times, face a barrage of comments from disgruntled users who complain of half finished products with masses of quirks and anomalies, quietly drop all support and then proudly unveil the next generation of the same !
Repeat ad nauseum !
Sorry if this causes anyone offence but I've seen this sequence of events repeated so often it defies belief.
Try 50,000 Volts, a couple of jump leads and the assistance of a certain Dr Frankenstein !
Sadly the Revalver situation is yet another reflection of the general Peavey ethos which goes something like this.
Develop a good product with lots of potential, market it poorly, update it's software / firmware a couple of times, face a barrage of comments from disgruntled users who complain of half finished products with masses of quirks and anomalies, quietly drop all support and then proudly unveil the next generation of the same !
Repeat ad nauseum !
Sorry if this causes anyone offence but I've seen this sequence of events repeated so often it defies belief.
Re: Almost 2 years since an update?
Seems like there is no interest from Peavey into Revalver anymore.
Beta tester forum seems gone too.
A lot of concerns and criticism we had in the beta forum are now true.
Beta tester forum seems gone too.
A lot of concerns and criticism we had in the beta forum are now true.
Re: Almost 2 years since an update?
...I guess we all have our answer...
Re: Almost 2 years since an update?
I sort of wish Peavey would just officially kill off Revalver. I come back here about every six months hoping to hear they are at least beta testing something or even fixing a bug or two and yet, it is always a wasteland... sometimes there will only be like one or two posts over periods of months. It is a shame to see something sort of abandoned/orphaned.
Looking at Micheal's profile, he has not even posted in nearly a year and he is both the primary developer of the tool and moderator of this forum.
Looking at Micheal's profile, he has not even posted in nearly a year and he is both the primary developer of the tool and moderator of this forum.
Re: Almost 2 years since an update?
Rather than just abandon it, I wish they would at least donate it to the public domain so worldwide developers could carry it forward. Something like the way Reaper is constantly updated.
Re: Almost 2 years since an update?
Hello all,
We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.
As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!
Cheers,
José
We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.
As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!
Cheers,
José
José Luiz Paiz Junior
Peavey ReValver Support
My banks for MKIII.V:
http://forums.peavey.com/viewtopic.php?f=45&t=25152
http://forums.peavey.com/viewtopic.php?f=45&t=28688
Peavey ReValver Support
My banks for MKIII.V:
http://forums.peavey.com/viewtopic.php?f=45&t=25152
http://forums.peavey.com/viewtopic.php?f=45&t=28688
Re: Almost 2 years since an update?
Thanks for the heads-up, José !!!
Re: Almost 2 years since an update?
Great to hear this, thank you!Jose Luiz wrote: ↑Fri Jul 27, 2018 6:41 pmHello all,
We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.
As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!
Cheers,
José
Re: Almost 2 years since an update?
Cool. I really hope to see something new soon. Revalver was really coming along well.
Re: Almost 2 years since an update?
Hi José!Jose Luiz wrote: ↑Fri Jul 27, 2018 6:41 pmHello all,
We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.
As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!
Cheers,
José
What does it take to be in the beta testers group? I love ReValver and would like to contribute to its testing.
-
- Member
- Posts: 17
- Joined: Thu Apr 30, 2015 1:27 am
- Contact:
Re: Almost 2 years since an update?
Yeah, I also would like to be beta-tester of new product as a bass-player)
Re: Almost 2 years since an update?
what happen now ?. I hope there come true stereo support for double track VSTi guitars. so left and right input can easy distort with the same effects on left and right sideJose Luiz wrote: ↑Fri Jul 27, 2018 6:41 pmHello all,
We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.
As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!
Cheers,
José