3 years (and counting!) since an update?

ReValver product discussion. This is a user-to-user forum, and not product support.

Moderators: Michael Ljunggren, ReValver Support Team

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

Re: Almost 2 years since an update?

Post by Bill0287 » Mon Dec 17, 2018 5:44 pm

I don't know about anyone else, but I have basically moved on to the other products.

Fastwind
Member
Posts: 228
Joined: Mon Apr 20, 2009 10:17 am

Re: Almost 2 years since an update?

Post by Fastwind » Tue Dec 18, 2018 5:03 am

Bill0287 wrote:
Mon Dec 17, 2018 5:44 pm
I don't know about anyone else, but I have basically moved on to the other products.
Not me!
Peavey may take a long time to come out with new stuff, but ReValver4 is still better than anything else, even after all this time.
I can't deny that I'm longing to hear some news from them, but this software still works extremely well, so I don't NEED anything new!
(it would be great, though!)

It's a strange thing: we guitarists can use a vintage amp for decades without complaining, but when it comes to modern tech, we Always want more...
We must be spoiled... :D

Segomil
New Member
Posts: 7
Joined: Thu Jan 10, 2019 8:29 am

Re: Almost 2 years since an update?

Post by Segomil » Fri Jan 11, 2019 11:39 am

Did i make a mistake by buying REvalver 4 ? ...
I read the complaints here & what i can say, the complainers are right
I didn't know that the last update was 2 years & a half ago ...
Before i bought REvalver I should have read this post.
136$ of old stuff !
God help me

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

Re: Almost 2.5 years since an update?

Post by Bill0287 » Sun Feb 03, 2019 4:08 pm

bump

User avatar
Cristofe
Member
Posts: 203
Joined: Sun Feb 02, 2003 7:26 am
Location: Auburn, NY USA
Contact:

Re: Almost 2.5 years since an update?

Post by Cristofe » Fri Feb 08, 2019 1:36 pm

A hardware controller.....or better still a standalone hardware version would be awsomely awesome!! :mrgreen:
Play accordion....get beheaded....it's sharia law

https://soundcloud.com/cristofe-chabot

lionheart
Member
Posts: 810
Joined: Sun Mar 11, 2012 3:02 pm
Location: Lincoln UK

Re: Almost 2.5 years since an update?

Post by lionheart » Sat Feb 09, 2019 3:23 am

Since obtaining RV4 I have used nothing else for my home recordings and use the standalone version through a pair of bi-amped monitors for practice as they sound better than any of my valve amps at low volume.

I 100% agree with Cristofe regarding a hardware or amp based version of RV4.

If Marshall can do it with the "Code" series of amps I am absolutely certain Peavey could beat them at their own game with their own hybrid software / hardware amp design.

Incidentally, in side by side tests I was able to produce much more convincing "Marshall" tones than the Marshall Code could manage using a MK1 Peavey Vypyr 30 and a Boss Katana (technically a multi FX unit with a class AB solid state amp added on) which in my opinion is THE amp for convincing Marshall impersonations.

Come on Peavey, get to it !
You have the technology, you have the capability, time to show the rest of the world how it's done I think.

Marketing dept needs to get it's finger out to really make things sell !

User avatar
Cristofe
Member
Posts: 203
Joined: Sun Feb 02, 2003 7:26 am
Location: Auburn, NY USA
Contact:

Re: Almost 2.5 years since an update?

Post by Cristofe » Wed Feb 20, 2019 3:06 pm

Absolutely. I use an old Peavey Transtube Studio Pro 112 with ALL my hardware modelers as it has a lot of transparent clean headroom
and an FX loop.....perfect for the job. Its sounds great with my Roland GS-10 and Line 6 POD X3 I can only imagine how much better it
would sound with an R4 hardware rack.....and the idea of being able to use the R4 software as an editor for a hardware rack I can
just toss in a gig bag and take to the gig.....I can't say in public how much that excites me.....LOL!! :mrgreen: :mrgreen: :mrgreen:
Play accordion....get beheaded....it's sharia law

https://soundcloud.com/cristofe-chabot

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

Re: 2 years 8 months (and counting) since an update?

Post by Bill0287 » Fri Apr 05, 2019 5:58 pm

bump

xuyn2003
Member
Posts: 52
Joined: Mon Apr 21, 2014 11:28 pm

Re: Almost 2 years since an update?

Post by xuyn2003 » Fri May 17, 2019 1:43 am

Jose Luiz wrote:
Fri Jul 27, 2018 6:41 pm
Hello all,

We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.

As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!

Cheers,

José
Hi José,
Any news about Revalver? Thank you!

functionform
New Member
Posts: 8
Joined: Wed Jun 05, 2019 1:26 am

Re: 2 years 8 months (and counting) since an update?

Post by functionform » Wed Jun 05, 2019 1:32 am

I just got this after having GR5 and Bias for a while. Revalver is the only one that actually makes me want to jam on guitar again. I suppose if the product dies I could live with Bias, but until that day I'm so happy I found this product. Makes me feel like I just heard a guitar for the first time. Beautiful beautiful software.

sealsongs
Member
Posts: 12
Joined: Mon Dec 16, 2013 11:40 am

Re: 2 years 8 months (and counting) since an update?

Post by sealsongs » Wed Jul 10, 2019 12:30 pm

Please, please...give us an update. It's been so long since any news. The sound of silence. Hello darkness, my old friend...

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

Re: 3 years (and counting!) since an update?

Post by Bill0287 » Tue Jul 23, 2019 10:39 am

Peavey is going to be hitting the "3 years" mark without a single update to ReValver... sad indeed.

lionheart
Member
Posts: 810
Joined: Sun Mar 11, 2012 3:02 pm
Location: Lincoln UK

Re: 3 years (and counting!) since an update?

Post by lionheart » Tue Jul 23, 2019 3:31 pm

I think Peavey are attempting to break Line 6's update record with Pod Farm 2 - it's about 8 years since that had an update and it's still available for purchase too !!!!!

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

Re: 3 years (and counting!) since an update?

Post by Bill0287 » Wed Sep 04, 2019 12:56 pm

passed the 3 year mark now...is there any end in sight?

VSW
Member
Posts: 110
Joined: Wed Dec 14, 2016 4:48 pm

Re: 3 years (and counting!) since an update?

Post by VSW » Wed Sep 04, 2019 1:15 pm

3 years, no update?

I would say the end is clearly in sight.
Vaughan

Post Reply