3 years (and counting!) since an update?

ReValver product discussion. This is a user-to-user forum, and not product support.

Moderators: Michael Ljunggren, ReValver Support Team

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

3 years (and counting!) since an update?

Post by Bill0287 » Sun Apr 01, 2018 8:37 pm

The last updated version of Revalver came out on August 30th, 2016 (160830)...?

So what's going on guys? Are we ever going to see some enhancements to this product again?
Last edited by Bill0287 on Tue Jul 23, 2019 10:38 am, edited 3 times in total.

xuyn2003
Member
Posts: 52
Joined: Mon Apr 21, 2014 11:28 pm

Re: Almost 2 years since an update?

Post by xuyn2003 » Wed Apr 11, 2018 9:36 am

Yes, any infomation about Revalver4's development?

User avatar
Scooterx2
Member
Posts: 299
Joined: Tue Feb 07, 2012 9:44 pm

Re: Almost 2 years since an update?

Post by Scooterx2 » Tue May 15, 2018 9:41 pm

Bump
Jesus, Family, Peavey, & Duct tape in that order !:)>

lionheart
Member
Posts: 810
Joined: Sun Mar 11, 2012 3:02 pm
Location: Lincoln UK

Re: Almost 2 years since an update?

Post by lionheart » Mon May 28, 2018 8:55 am

I think it's going to take a little more than "BUMP" to bring this one back from the dead.
Try 50,000 Volts, a couple of jump leads and the assistance of a certain Dr Frankenstein !

Sadly the Revalver situation is yet another reflection of the general Peavey ethos which goes something like this.

Develop a good product with lots of potential, market it poorly, update it's software / firmware a couple of times, face a barrage of comments from disgruntled users who complain of half finished products with masses of quirks and anomalies, quietly drop all support and then proudly unveil the next generation of the same !
Repeat ad nauseum !

Sorry if this causes anyone offence but I've seen this sequence of events repeated so often it defies belief.

Lain
Member
Posts: 588
Joined: Fri Jan 25, 2013 7:05 am
Location: Germany

Re: Almost 2 years since an update?

Post by Lain » Thu May 31, 2018 7:40 am

Seems like there is no interest from Peavey into Revalver anymore.
Beta tester forum seems gone too.

A lot of concerns and criticism we had in the beta forum are now true.

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

Re: Almost 2 years since an update?

Post by Bill0287 » Wed Jun 06, 2018 11:45 am

...I guess we all have our answer...

Elric
Member
Posts: 112
Joined: Mon Dec 17, 2007 6:01 pm

Re: Almost 2 years since an update?

Post by Elric » Fri Jul 13, 2018 11:46 am

I sort of wish Peavey would just officially kill off Revalver. I come back here about every six months hoping to hear they are at least beta testing something or even fixing a bug or two and yet, it is always a wasteland... sometimes there will only be like one or two posts over periods of months. It is a shame to see something sort of abandoned/orphaned.

Looking at Micheal's profile, he has not even posted in nearly a year and he is both the primary developer of the tool and moderator of this forum.

Bill0287
Member
Posts: 49
Joined: Thu Apr 29, 2010 10:41 am

Re: Almost 2 years since an update?

Post by Bill0287 » Fri Jul 13, 2018 4:11 pm

Rather than just abandon it, I wish they would at least donate it to the public domain so worldwide developers could carry it forward. Something like the way Reaper is constantly updated.

User avatar
Jose Luiz
Member
Posts: 674
Joined: Fri Jul 17, 2009 12:39 pm

Re: Almost 2 years since an update?

Post by Jose Luiz » Fri Jul 27, 2018 6:41 pm

Hello all,

We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.

As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!

Cheers,

José
José Luiz Paiz Junior
Peavey ReValver Support
My banks for MKIII.V:
http://forums.peavey.com/viewtopic.php?f=45&t=25152
http://forums.peavey.com/viewtopic.php?f=45&t=28688

Fastwind
Member
Posts: 228
Joined: Mon Apr 20, 2009 10:17 am

Re: Almost 2 years since an update?

Post by Fastwind » Mon Jul 30, 2018 11:04 am

Thanks for the heads-up, José !!!

xuyn2003
Member
Posts: 52
Joined: Mon Apr 21, 2014 11:28 pm

Re: Almost 2 years since an update?

Post by xuyn2003 » Sun Aug 05, 2018 1:27 am

Jose Luiz wrote:
Fri Jul 27, 2018 6:41 pm
Hello all,

We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.

As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!

Cheers,

José
Great to hear this, thank you!

carltonec
Member
Posts: 55
Joined: Mon Jan 03, 2011 4:31 pm

Re: Almost 2 years since an update?

Post by carltonec » Sun Aug 12, 2018 2:22 pm

Cool. I really hope to see something new soon. Revalver was really coming along well.

Soundwise
Member
Posts: 30
Joined: Fri Mar 18, 2016 5:16 pm

Re: Almost 2 years since an update?

Post by Soundwise » Mon Oct 22, 2018 4:22 pm

Jose Luiz wrote:
Fri Jul 27, 2018 6:41 pm
Hello all,

We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.

As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!

Cheers,

José
Hi José!
What does it take to be in the beta testers group? I love ReValver and would like to contribute to its testing.

eve_ripper
Member
Posts: 17
Joined: Thu Apr 30, 2015 1:27 am
Contact:

Re: Almost 2 years since an update?

Post by eve_ripper » Tue Oct 23, 2018 3:21 am

Yeah, I also would like to be beta-tester of new product as a bass-player)

user4711
New Member
Posts: 9
Joined: Fri Dec 04, 2015 6:41 am

Re: Almost 2 years since an update?

Post by user4711 » Sun Dec 16, 2018 9:00 am

Jose Luiz wrote:
Fri Jul 27, 2018 6:41 pm
Hello all,

We understand that there's been a lack of news or releases for ReValver recently. We apologize for the silence.
However, we assure you that ReValver is not dead at all - development has never been put to a halt! In fact, we have been working very (very) hard on an exciting new addition to the ReValver line which will soon be going to beta.

As soon as we have official news it will be shared with you all. In the meantime, keep rocking on!

Cheers,

José
what happen now ?. I hope there come true stereo support for double track VSTi guitars. so left and right input can easy distort with the same effects on left and right side

Post Reply