Ampkit not working, not input or output signal
Moderator: AmpKit Support
-
- New Member
- Posts: 1
- Joined: Thu Jan 06, 2011 7:18 pm
Ampkit not working, not input or output signal
So, I just got an ampkit but i can't make it work. I've downloaded the free version of the app in my 2g ipod touch a couple of times, tested my cables, my headphones, 2 guitars and a bass and everytime I try there's not input signal, please help, getting a little frustrated over here. I e-mailed the agile guys twice but they haven't answered me yet.
Thanks a lot for helping me
Thanks a lot for helping me
Re: Ampkit not working, not input or output signal
What I know is that it will not work with first gneration iPOD touch models. The first generation IPOD touch units do not have the built in capability, bascially you can tell which ones are first generation becasue they do not have a speaker built in. Are you sure you have a 2GB iPOD Touch? I thought Apple started with 8 GB.
-
- New Member
- Posts: 4
- Joined: Fri Feb 04, 2011 6:19 am
Re: Ampkit not working, not input or output signal
I have a second gen touch and my won't work either. P.S. you can also tell the touch version by the model number on the back.
Here is a good way to tell: http://support.apple.com/kb/HT1353#ipodtouch
anyway, I have found no resolution to this problem and am looking into replacement.
Here is a good way to tell: http://support.apple.com/kb/HT1353#ipodtouch
anyway, I have found no resolution to this problem and am looking into replacement.
-
- New Member
- Posts: 1
- Joined: Sat Feb 26, 2011 6:46 pm
Re: Ampkit not working, not input or output signal
i just buy a new AMP LINK at guitar show in Birmingham yesterday.i cant even connect my ipod with this gadget.guide me please.how can i solve this problem? i dont wanna go back to birmingham.it cost me a lot of money.i would like to know what items that i must have to connect my ipod with my guitar by using AMP LINK.. A.S.A.P.
-
- Member
- Posts: 116
- Joined: Mon Jun 21, 2010 11:11 am
Re: Ampkit not working, not input or output signal
Any time you're having connection issues or through-put, definitely get in touch with us at [email protected] - We work extremely hard to resolve these cases asap.
Re: Ampkit not working, not input or output signal
Mine worked fine for a month and then became increasingly difficult to get a good connection. I often had to pull the plug out slightly and finally I couldn't get it to work at all. I took it apart and found that the 1/4 plug interface is a series of 3 small metal contacts which are just 'snapped' into the circuit board. As these contacts are used repeatedly, they loosen up. I tried to re-snap them in and this works temporarily (like 2 or 3 times) and then the problem reappears.
My solution was to carefully solder these contacts into the board and this has solved the connection problems. Do this at your own risk but I found it not too difficult and eliminates the frustration of fiddling with this device instead of playing.
This is definitely a design problem that I hope AmpKit addresses it with their next version. I would be surprised if they were not aware of this problem already.
My solution was to carefully solder these contacts into the board and this has solved the connection problems. Do this at your own risk but I found it not too difficult and eliminates the frustration of fiddling with this device instead of playing.
This is definitely a design problem that I hope AmpKit addresses it with their next version. I would be surprised if they were not aware of this problem already.
Re: Ampkit not working, not input or output signal
Just wanted to let everyone know that my AmpKit arrived yesterday. Tried it with both 4th Gen iTouch and 3rd Gen iPhone but both times with no success whatsoever.
I have now requested a replacement - will let you know if it works.
Judging by general web feedback you have to wonder if the design of AmpKit is simply not robust enough...
I have now requested a replacement - will let you know if it works.
Judging by general web feedback you have to wonder if the design of AmpKit is simply not robust enough...
-
- Member
- Posts: 116
- Joined: Mon Jun 21, 2010 11:11 am
Re: Ampkit not working, not input or output signal
Do not go back to your retailer at this point. Get in touch with me so we can be certain where the replacement comes from. [email protected]
Re: Ampkit not working, not input or output signal
Had to replace mine. First one didn't work. It's a known issue and there are issues with the jack input not getting a proper connection. Had mine replaced, it works now but sadly mine has lots of feedback so I can't even play it with high gain. That was the whole point to me. I have an iPhone 4 completely updated.
Not impressed with this product at all. $40 down the drain for the Amp Link and purchased amp and effect.
Should be a recall if you ask me. It's the right thing to do.
dropd
Not impressed with this product at all. $40 down the drain for the Amp Link and purchased amp and effect.
Should be a recall if you ask me. It's the right thing to do.
dropd
-
- Member
- Posts: 116
- Joined: Mon Jun 21, 2010 11:11 am
Re: Ampkit not working, not input or output signal
dropd - have we chatted? If you got a proper replacement, then you shouldn't be getting feedback, and that's likely a different issue. Let me know.
-
- New Member
- Posts: 1
- Joined: Sun May 22, 2011 6:58 am
Re: Ampkit not working, not input or output signal
Same Problem Here.
Very low input levels can be reached despit input gain of 100%
( 2 - 4 green bars with strong strumming)
Result is the same for several guitars, several instrument cords, several sets of batteries.
Its a complete waste of time.
I expect a prompt response and a fix guys because this is really not what folks expect from all the reviewers and manufacturer's claims.
If there is a bad batch get them off the street, or urgently tell all suppliers what is going on, so they can deal with their / your customers quickly maintaining goodwill
My guitar shop guy thinks I am technically incompetent. My academic records suggests otherwise.
Also I think the support email is very difficult to find.
I have now email [email protected].
But woudl appreciate a response here too.
Cheers
With a problem like this, make it obvious, as well as any solution.
Very low input levels can be reached despit input gain of 100%
( 2 - 4 green bars with strong strumming)
Result is the same for several guitars, several instrument cords, several sets of batteries.
Its a complete waste of time.
I expect a prompt response and a fix guys because this is really not what folks expect from all the reviewers and manufacturer's claims.
If there is a bad batch get them off the street, or urgently tell all suppliers what is going on, so they can deal with their / your customers quickly maintaining goodwill
My guitar shop guy thinks I am technically incompetent. My academic records suggests otherwise.
Also I think the support email is very difficult to find.
I have now email [email protected].
But woudl appreciate a response here too.
Cheers
With a problem like this, make it obvious, as well as any solution.
-
- Member
- Posts: 116
- Joined: Mon Jun 21, 2010 11:11 am
Re: Ampkit not working, not input or output signal
Greg,
If you emailed us at info@, then we should be in touch at this point. We'll get this resolved asap.
If you emailed us at info@, then we should be in touch at this point. We'll get this resolved asap.
Re: Ampkit not working, not input or output signal
bradly_ny
I have not checked this post in a while.
I haven't touched the Amplink in weeks.
I will have to retry and repost exactly what is happening.
dropd
Thanks for addressing it.
I have not checked this post in a while.
I haven't touched the Amplink in weeks.
I will have to retry and repost exactly what is happening.
dropd
Thanks for addressing it.
-
- Member
- Posts: 116
- Joined: Mon Jun 21, 2010 11:11 am
Re: Ampkit not working, not input or output signal
dropd - absolutely - fastest way to work through this is to get in touch with me directly via email or using the in-app contact options (under info). Those come directly to us.
Re: Ampkit not working, not input or output signal
Hi everyone, first time here. Got mine today and also no suond and nothing on the out and input meter. Pulled the guitar plug slowly out off the input jack about 2-3 mm and then it it worked.
So i disassembled it and as DSR31 did i did to but it seems to get loose again and i have to pull it out a bit to make it work.
Regards Peter from Sweden
So i disassembled it and as DSR31 did i did to but it seems to get loose again and i have to pull it out a bit to make it work.
Regards Peter from Sweden