Dual Custom Lite (in serial) - Lead

A place to share ReValver Presets

Moderators: Michael Ljunggren, ReValver Support Team

Locked
Spacekid
Member
Posts: 329
Joined: Thu Aug 28, 2014 2:24 pm

Dual Custom Lite (in serial) - Lead

Post by Spacekid » Sat Sep 13, 2014 6:17 pm

Something to do with the Custom lite amp. The final tube sections have been replaced as: amp 1 - EL84, amp 2 - 6L6 GC. The preset uses the 57 EV Edge impulse from the Phil Fee Collection. It is a cpu hog, just take off an effect if it pops.
Attachments
X6 57 EV Edge.zip
(33.56 KiB) Downloaded 343 times

Spacekid
Member
Posts: 329
Joined: Thu Aug 28, 2014 2:24 pm

Re: Dual Custom Lite (in serial) - Lead

Post by Spacekid » Sat Sep 13, 2014 8:50 pm

Heavenly 4X12 version; slight eq adjustment :D
Attachments
X8 Heavenly 4X12 ux87(c).zip
(33.58 KiB) Downloaded 337 times

javcab08
New Member
Posts: 3
Joined: Thu Sep 11, 2014 10:12 pm
Location: CT USA
Contact:

Re: Dual Custom Lite (in serial) - Lead

Post by javcab08 » Sun Sep 14, 2014 10:07 am

Thank you very much for sharing!!
I'll try it later tonight.

Spacekid
Member
Posts: 329
Joined: Thu Aug 28, 2014 2:24 pm

Re: Dual Custom Lite (in serial) - Lead

Post by Spacekid » Sun Sep 14, 2014 1:06 pm

javcab08 wrote:Thank you very much for sharing!!
I'll try it later tonight.
You're welcome..here is the last dual amp I'm going to do for now, it's uses the sensation 20 and custom lite. Both have edited internals so save their presets if you like them :)
Attachments
X11 Heavenly 412 ux87 (c).zip
(33.78 KiB) Downloaded 325 times

Spacekid
Member
Posts: 329
Joined: Thu Aug 28, 2014 2:24 pm

Re: Dual Custom Lite (in serial) - Lead

Post by Spacekid » Sun Sep 14, 2014 2:04 pm

^Again delay with wet at around 4.57% works well with these presets.

Locked