Hi:
I just bought a PV 14 USB but I´m a little confused. In other mixers, there is an "Effects (EFX) Send" and a "Effects Return" channel. In the PV 14 there is only a "EFX Send" channel. How do send the signal back to the mixer? I will really appreciate if you can add a simple diagram.
Thanks a lot!
PV 14 USB Effects hookup
-
- Member
- Posts: 123
- Joined: Thu Feb 07, 2013 8:40 am
Re: PV 14 USB Effects hookup
Hi jorgezavaleta,
The PV 14 USB does have an EFX Return knob. It is located next to the knob that controls the EFX type. Here is a screenshot from the manual.
18 - EFX Return
Once the input level is set, use the EFX Return control to mix the effects processor output into the main left/right outputs.
The PV 14 USB does have an EFX Return knob. It is located next to the knob that controls the EFX type. Here is a screenshot from the manual.
18 - EFX Return
Once the input level is set, use the EFX Return control to mix the effects processor output into the main left/right outputs.
Scott Dickey
Peavey Embedded Software Engineer
Peavey Embedded Software Engineer