VYPYR II FIRMWARE ISSUE

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
Denzil Moats
New Member
Posts: 2
Joined: Fri Apr 08, 2022 12:46 pm

VYPYR II FIRMWARE ISSUE

Post by Denzil Moats » Fri Apr 08, 2022 1:09 pm

Hello,...Please, please help. So I decided to apply the firmware update on my VYPYR II. I followed the instructions to the letter, Once the update was finished, I was instructed to power down the amp, wait 5 seconds then power the amp back on. When I turned the amp back on, you could hear the power go into the amp, there's an infamous PEAVEY THUMP when turning on any PEAVEY amp. You could hear that, along with the power hitting the speaker but ...no lights come on, and when hooking up a guitar, it makes no sound whatsoever ever. I've tried to redo the update but the computer does not recognize the amp being plugged in...so I'm stuck. I can't afford to replace the amp, I need a tech savvy hero...please help*

WrldEatr9
Member
Posts: 116
Joined: Wed Jan 02, 2019 9:35 pm

Re: VYPYR II FIRMWARE ISSUE

Post by WrldEatr9 » Sat Apr 09, 2022 3:47 pm

Contact Peavey Customer Support, see what they suggest.

Post Reply