My computer isn’t recognizing Peavey Vypyr!!!

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
ethanmiles
New Member
Posts: 1
Joined: Wed Jan 12, 2022 8:59 am

My computer isn’t recognizing Peavey Vypyr!!!

Post by ethanmiles » Tue Jan 18, 2022 5:07 am

I connected it via a USB type B cable to USB type A cable into one of my pc’s usb ports but it isn’t acknowledging the amp is even plugged in. I have tried with both power on the amp and off. Also with a guitar plugged in and without.

Anybody know how to fix this?

UPDATE: I figured it out! I had to unscrew the case, slide the electronic board out justttt enough, and realized the ribbon cable for the usb port just wasn’t plugged in! Plugged the sucker in, put the amp back together and it works with zero issues now!
Best regards

Ethan Miles
download gb whatsapp

A4_B6
New Member
Posts: 3
Joined: Mon May 16, 2022 7:41 am

Re: My computer isn’t recognizing Peavey Vypyr!!!

Post by A4_B6 » Mon May 16, 2022 7:53 am

Mine did the same and all of a sudden it recognized it again but I didn't change anything!

thama14
New Member
Posts: 1
Joined: Wed Sep 27, 2023 10:31 am
Location: mexico

Re: My computer isn’t recognizing Peavey Vypyr!!!

Post by thama14 » Fri Dec 08, 2023 12:24 pm

I think the computer didn't recognize the Peavey Vypyr because the ribbon cable for the USB port wasn't plugged in. After plugging it in and reassembling the amp, it worked perfectly. please let me know if it will be workable yes or no. :?:

Post Reply