So, as my good deed for the day, I'm putting it all here in this (presumably Googleable) post for future Vypyr Pro 100 users who find themselves in the same predicament. Let the karma rain down upon me!
Here's the Windows installer/updater app:
- From Peavey (still on their site, but not linked to anywhere publicly (that I could find, anyway))
- Stored in my Google Drive: .zip | .exe
- From Peavey (still available on their Software page (as of November 2021))
- Stored in my Google Drive: .zip | .syx
- Stored in my Google Drive: .zip
- Connect the Vypyr Pro 100 to your Windows PC (I was using Windows 10) via a USB cable.
- Put the Vypyr Pro 100 into update mode by pushing the inner knob (near the power/standby switch) and turning clockwise until the update option is showing. (You might need to push the inner knob again to select... I don't remember, but it should be obvious.)
- Run the app and follow the rest of the prompts.
---
*Of course, there's always the chance that I'm an idiot and the files exist somewhere easy and obvious. In which case, please do let me know!