VYPYR VIP 2 knobs only go clockwise

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
ERVWIN
New Member
Posts: 2
Joined: Wed Aug 24, 2016 4:31 am

VYPYR VIP 2 knobs only go clockwise

Post by ERVWIN » Sun Sep 27, 2020 6:00 am

I have had this problem for a year but it just started to bother me. All the parameter knobs (pre-gain, low,mid,high, post-gain) only go up, when I turn the knobs backwards, first they try moving slightly backwards but then start going upwards. I tried doing a factory reset and either I did it wrong or it didn't work. What could be the problem with those potentiometers/encoders?

User avatar
JamesPaul
Member
Posts: 2208
Joined: Fri Sep 12, 2008 7:28 pm
Location: Hometown of THE GODZ & ROSIE

Re: VYPYR VIP 2 knobs only go clockwise

Post by JamesPaul » Mon Sep 28, 2020 5:10 pm

Try searching this subforum, but I seem to recall someone else had encoder issues. The encoders responded quite to a spray of Deoxit and a little turning to resolve the weird behavior. Quite similar to dirty potentiometers.
Enzo wrote:I find if the amp is working, that is a good point to stop fixing it.
James Paul's Peaveys
Decade, Classics, Ecoustic, Windsors, VYPYR, Triple XXX, XXL, VKs, Bandit, JSXs, VIP, Piranha and a Penta.

Post Reply