VIP 3 firmware update failed

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
Stumanson
New Member
Posts: 1
Joined: Sun Sep 13, 2020 5:08 pm

VIP 3 firmware update failed

Post by Stumanson » Sun Sep 13, 2020 5:23 pm

Hi All,

I attempted to update the firmware on my VIP 3 but it failed leaving me with a dead amp.

Any suggestions would be helpful. I have the ability to do a manual flash of the U2 chip but I need a copy of the raw firmware.

Can anyone help?

Thanks in advance
Stu

ItsOnlyMe
New Member
Posts: 2
Joined: Sun Oct 25, 2020 9:51 am

Re: VIP 3 firmware update failed

Post by ItsOnlyMe » Sun Oct 25, 2020 10:39 am

i just purchased a VIP3 off ebay for 12.50GBP with Sanpera2 which was stuck in distortion channel after much research i found someone posted a link to updater version 2.61 rather than version 3 left it running overnight ... after 20 hours i decided it either wasnt working or had finished and not posted as such.

switched the amp off and back on with no guitar connected and now have a fully functional amp

Post Reply