Vyper 120 not powering up

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
New Member
Posts: 1
Joined: Wed Jul 22, 2020 1:52 pm

Vyper 120 not powering up

Post by Psycomustang » Wed Jul 22, 2020 2:02 pm

I have a Peavy Vyper 120 and when I hit standby to warm tubes nothing happens. I've checked all fuses and replaced all tubes but nothing happens LEDs dont start up nothing. No I hit power and everything fires up I get humm from transformer on the power cord side but none front hw one o other side. Is that a bad transformer? Thanks

User avatar
Posts: 9118
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: Vyper 120 not powering up

Post by Enzo » Wed Jul 22, 2020 6:21 pm

Check your low voltage supplies. And to check a fuse, remove it from the clip and use an ohm meter.

Post Reply