When I first got amp, the Vypyr Edit software worked about 40 to 50% of the time. I now can connect to the amp o.k. and change settings. However, when I plug in guitar, I get no sound at all from the amp. Unplug the USB and I have sound. I have VIP 1 with Firmware 1.62, and I am running Windows 10. I have tried connect with Guitar connected and with it not connected, same results, NO SOUND when USB is plugged in and connected with Edit software. I have uninstalled, reinstalled edit software. Would appreciate any suggestions.
Thank you,
Chuck
VYPYR EDIT ISSUES
-
[email protected]
- New Member
- Posts: 3
- Joined: Sat Jul 11, 2020 1:11 pm
- Location: Brighton, CO
Re: VYPYR EDIT ISSUES
Have the same problem though I did get it to work in Windows 7
Re: VYPYR EDIT ISSUES
While I have not used Vypyr Edit for a long time so I started it up today and tested it with my VIP1 and VIP3. I use Windows 10. Everything worked the way it should. Three things you can check, 1 the USB cable, 2 the USB board and 3 The cable inside the amp that connects USB board to the Dsp board
HAPPY DAYS: