I just received my vypyr 3 amp and 5 out of 8 of the plastic corners/feet are broken. Anyone know where I can order replacements? Preferably metal so they don't break again???
Thanks!
Vypyr 3 case corners (plastic feet)
Re: Vypyr 3 case corners (plastic feet)
I had the same issue several years ago when I bought mine.
Sad to see that they haven't fixed it.
I got replacements from Peavey, I carefully opened up the mounting holes a bit and did not tighten the screws down all the way.
Seems to be better if not perfect.
I couldn't find metal replacements, let me know if you do.
Cool amp though.
Sad to see that they haven't fixed it.
I got replacements from Peavey, I carefully opened up the mounting holes a bit and did not tighten the screws down all the way.
Seems to be better if not perfect.
I couldn't find metal replacements, let me know if you do.
Cool amp though.
-
stratpurist
- Member
- Posts: 30
- Joined: Tue Oct 04, 2016 3:33 pm
Re: Vypyr 3 case corners (plastic feet)
I used my VIP 2 for a couple months as a gigging amp (connected to a 2x12 cab). A couple of trips in the equipment trailer and the corners disintegrated. I replaced all of them with metal corners.
"Everyone is entitled to their own opinions but not their own facts" Tip O'Neal
Guitars: 73 stratocaster, 2 Mexi strats, partscaster, 84 Epiphone Sheraton II, 76 Japanese LP clone
Amps: VYPYR 75, VYPYR 30, VIP II, sanpera II, Behringer GMX210
Guitars: 73 stratocaster, 2 Mexi strats, partscaster, 84 Epiphone Sheraton II, 76 Japanese LP clone
Amps: VYPYR 75, VYPYR 30, VIP II, sanpera II, Behringer GMX210