Vyper 2 amp w/Sanpera 2 pedal.

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
Carlos MOL
New Member
Posts: 1
Joined: Tue May 28, 2019 2:14 pm

Vyper 2 amp w/Sanpera 2 pedal.

Post by Carlos MOL » Tue May 28, 2019 2:31 pm

Recently purchased Sanpera 2 pedal to use with VIP Vyper 2 amp. When plugged in the pedal display shows the original clean setting. When I scroll down or up to another preset and stop on any other preset, within 20 seconds or so the pedal returns to the original preset. All other functions seem to work except changing Banks and or presets. Must be a "Nut Loose" behind the wheel... Can anyone set me straight???

User avatar
Posts: 524
Joined: Sun Oct 20, 2013 1:39 pm

Re: Vyper 2 amp w/Sanpera 2 pedal.

Post by wmjones » Fri May 31, 2019 8:16 pm

When you change banks you must select a preset (1, 2, 3 or 4) within a few seconds or the amp returns to your last preset. Changing presets in the same bank should give no problem.

Post Reply