Thinking about a tube AMP..
Is there a way setup the amp to work completely clean, I have a
Boss ME-25 I would like to use more often. When both are in use there
is way too much going on.
Also whats the best setup , it seem I can only run the boss into a
guitar channel, then plug the guitar into the Boss.
Thanks
Vypyr VIP 2
Re: Vypyr VIP 2
Yes, hook up the ME-25's headphone out to the VIP 2's Aux In.
-
- New Member
- Posts: 1
- Joined: Sat Jan 09, 2021 2:32 pm
Re: Vypyr VIP 2
I have the same question and it doesn't seem like anybody has answered it. How do you deselect presets so there are no presets being used? Also no echo and no delay. I want to use my Boss Core1000 and send that to a clean amp. The user manual doesn't seem to answer this question. Thanks in advance.
Re: Vypyr VIP 2
I did answer the question. You'd connect it to the Aux In. That way you bypass all preamp and use the VIP basically just as a power amp.
Re: Vypyr VIP 2
What you want is to make a clean pre-set which you use for your pedals.
Pick an amp you like, set it to the clean channel, turn off the delay, reverb and stompboxes. Then save that as a pre-set. Use that pre-set when you want to feed your pedals into a clean setting.
Pick an amp you like, set it to the clean channel, turn off the delay, reverb and stompboxes. Then save that as a pre-set. Use that pre-set when you want to feed your pedals into a clean setting.