Anybody have any idea why a PM18S podium mic would suddenly quit working for no apparent reason? It's on the same cable in the same podium it has been in for 2 years. Nothing has been moved. The 48V phantom power is turned on as usual. The blue "power" light on the mic does not light up. The mic does not work on another mic cable with 48V phantom power.
There was a period of about 2 weeks, immediately after installation, when the mic would pop loudly when a static charge built up in the preacher's body from walking on the nylon pile carpet. Even if you merely touched the wooden podium, it would cause the mic to pop. That problem was solved by putting rubber grommets between the carpet and the metal mic jack plate and also between the wooden podium and the metal base of the PM18S.
That was approximately 2 years ago, and there have been no problems until now.
PM18S mic quit...
- studiodtk5
- Member
- Posts: 2262
- Joined: Sat Feb 20, 2010 1:39 pm
- Location: Toledo, Ohio
Re: PM18S mic quit...
Hard to tell exactly. It sounds like power is not getting to the element.
Darren
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...