PVM44 mike cord

This forum is for talking about all kinds of Peavey microphones
Post Reply
terrytunes
New Member
Posts: 2
Joined: Sat Aug 05, 2017 4:01 am

PVM44 mike cord

Post by terrytunes » Sat Aug 05, 2017 4:10 am

I was given a PVM44 mike ,but it came with no cord. I've looked on line but cannot find any info on which cord I am to use. 1/4 inch or XLR? Thanks in advance.

Josjor
Member
Posts: 4229
Joined: Mon Sep 15, 2008 8:04 am

Re: PVM44 mike cord

Post by Josjor » Sat Aug 05, 2017 5:28 am

1/4" or XLR largely depends on what you're plugging in to, but a standard XLR microphone cable is preferred.
www.yandasmusic.com
Don't believe me. I'm just guessing.
Neutiquam Erro

terrytunes
New Member
Posts: 2
Joined: Sat Aug 05, 2017 4:01 am

Re: PVM44 mike cord

Post by terrytunes » Sun Aug 06, 2017 9:06 am

I will use it with Allen & Heath unpowered mixer, into an EV powered speaker. Will go with the xlr. Thanks for the info.

Post Reply