Hi all,
First time posting here so go easy!
I have a tube fex that recently stopped working properly.
It powers on and clicks, says the welcome message bit and then the read out is just full of black blocks and one flashes.
When I bought it the owner said he'd had the battery replaced, but when this happened for my own piece of mind i changed it out for a new one.
It powered on and it did something different, it kept clicking and the screen said something about memory, so I disagree reset with the arrow buttons, aaaaand back to the original issue.
I have a video and will try and attach it.
Any help would be truly appreciated as I'm gutted it's poorly!
Tubefex issue - firmware fault?
-
- New Member
- Posts: 5
- Joined: Wed Mar 20, 2019 4:17 pm
- Location: Virginia
Re: Tubefex issue - firmware fault?
If you replace the battery you have to reinitialize the unit. That is accomplished by holding the down and right arrows as you power up.
Hope this helps.
Hope this helps.