Tubefex issue - firmware fault?

This forum is for discussions on the various types of Peavey processors and effects.
Post Reply
Bretth89
New Member
Posts: 1
Joined: Sat Jun 23, 2018 12:17 pm

Tubefex issue - firmware fault?

Post by Bretth89 » Sat Jun 23, 2018 12:24 pm

Hi all,
First time posting here so go easy!

I have a tube fex that recently stopped working properly.
It powers on and clicks, says the welcome message bit and then the read out is just full of black blocks and one flashes.
When I bought it the owner said he'd had the battery replaced, but when this happened for my own piece of mind i changed it out for a new one.
It powered on and it did something different, it kept clicking and the screen said something about memory, so I disagree reset with the arrow buttons, aaaaand back to the original issue.
I have a video and will try and attach it.

Any help would be truly appreciated as I'm gutted it's poorly!

Swellsound
New Member
Posts: 5
Joined: Wed Mar 20, 2019 4:17 pm
Location: Virginia

Re: Tubefex issue - firmware fault?

Post by Swellsound » Wed Mar 20, 2019 4:59 pm

If you replace the battery you have to reinitialize the unit. That is accomplished by holding the down and right arrows as you power up.

Hope this helps.

Post Reply