VSX 26 settings

This forum is for discussions on the various types of Peavey processors and effects.
Post Reply
gknoob
New Member
Posts: 8
Joined: Sat Jul 21, 2012 12:17 am

VSX 26 settings

Post by gknoob » Mon Aug 07, 2017 1:06 pm

I am trying to find the correct VSX26 settings for my Versarray setup. It is 2 VR218 per side and 3 VR112's. The amplifiers are a Lab Gruppen FP13000 for the subs, Itech 8000 for mids, and an XTI 2000 for highs

Dano0369
Member
Posts: 255
Joined: Tue Jul 19, 2011 12:35 pm

Re: VSX 26 settings

Post by Dano0369 » Tue Aug 08, 2017 8:32 pm

Hello ; the setting for a vex can be downloaded from this site. I think some basic instructions are on the page. With those amps I would recommend safe settings and probably use the peak limiters in the dsp in the amps if you have those features. Good luck :arrow:
Dano0369

dj phil wv
New Member
Posts: 2
Joined: Fri Aug 23, 2019 2:32 pm

Re: VSX 26 settings

Post by dj phil wv » Fri Aug 23, 2019 3:09 pm

hello , did you get the vr 218 settings for the vsx26 , if so can you send link r info . i have 4 peavey qw2f tops and 4 vr218 subs with 3 peavey cs4080 amps . currently own a dbx driverack pa, but looking to buy vsx26 . thanks

Post Reply