VSX 26 settings
VSX 26 settings
I am trying to find the correct VSX26 settings for my Versarray setup. It is 2 VR218 per side and 3 VR112's. The amplifiers are a Lab Gruppen FP13000 for the subs, Itech 8000 for mids, and an XTI 2000 for highs
Re: VSX 26 settings
Hello ; the setting for a vex can be downloaded from this site. I think some basic instructions are on the page. With those amps I would recommend safe settings and probably use the peak limiters in the dsp in the amps if you have those features. Good luck
Dano0369
-
- New Member
- Posts: 2
- Joined: Fri Aug 23, 2019 2:32 pm
Re: VSX 26 settings
hello , did you get the vr 218 settings for the vsx26 , if so can you send link r info . i have 4 peavey qw2f tops and 4 vr218 subs with 3 peavey cs4080 amps . currently own a dbx driverack pa, but looking to buy vsx26 . thanks