XR 8600 Power Amp Input Question

This forum is for talking about all types of Peavey mixers.
Post Reply
luke4047
New Member
Posts: 1
Joined: Thu Oct 28, 2021 11:11 am

XR 8600 Power Amp Input Question

Post by luke4047 » Thu Oct 28, 2021 11:19 am

Hello,

Can anyone confirm that the front panel Power Amp 1 In routes to the Main Output and the front panel Power Amp 2 In routes to the Monitor Output when using Monitor/Main setting?

Thanks!

jim h
Member
Posts: 657
Joined: Fri Sep 12, 2008 11:20 pm

Re: XR 8600 Power Amp Input Question

Post by jim h » Thu Oct 28, 2021 3:47 pm

No...that's not how it works.

PA1 In goes to the input of Power Amp 1.

PA2 In goes to the input of Power Amp 2.

Crazy, right?

The mixer main mix always goes to the Main output jack.

The monitor mix always goes to the Monitor output jack.

The switch only comes in to play if you're not using the Power Amp input jacks. Then it determines which signal goes to the amplifiers.

So to answer your question, no.

Post Reply