PV 14AT Setup Help with MAC

This forum is for talking about all types of Peavey mixers.
Post Reply
mswwv
New Member
Posts: 1
Joined: Sun Aug 29, 2021 9:20 pm

PV 14AT Setup Help with MAC

Post by mswwv » Sun Aug 29, 2021 9:31 pm

Very new to this, so please be kind.

I am trying to setup a little home recording studio. Here is what I currently have:
  • PV 14AT Mixer with Autotune
  • 2 Peavy Powered Monitors
  • a MAC mini with a i5 processor and 16RAM
  • Using Reaper as the DAW
I am setup currently with my XLR line outs to the monitors. I am running USB-B out to the MAC.
I have a Mic into 1, a guitar into 2 and 3, and a keyboard into 4 and 5.
My guitar is running into a line 6 Spider III head before going into the mixer.

My playback from the MAC to the Mixer (through monitors sounds great).
However, I am getting really weak signal from the mixer to the MAC.

Again, not really sure what I am doing here, so any input would be appreciated.

IMG_5865.jpeg
IMG_5865.jpeg (2.49 MiB) Viewed 1053 times
Thanks,
Mike

Post Reply