P6 USB Effects Loop Issues

This forum is for talking about all types of Peavey mixers.
Post Reply
Brad7777
New Member
Posts: 1
Joined: Tue Dec 08, 2020 12:21 am

P6 USB Effects Loop Issues

Post by Brad7777 » Tue Dec 08, 2020 12:26 am

I recently got this P6 USB, I really like it. My one and only problem is that when I try to use the effects loop, I get horrible feedback and static.

I am trying to use my Zoom G1XN as my effects processor. If I just run it inline like normal, no problem, but when I send the signal through the loop I get said noise.

I am connected to my PC with the USB interface.

Stryker57
Member
Posts: 951
Joined: Fri Aug 20, 2010 9:39 am
Location: Cincinnati,Ohio

Re: P6 USB Effects Loop Issues

Post by Stryker57 » Tue Dec 08, 2020 5:40 pm

sounds like a possible overdriven signal maybe? is the zoom looking for a mic level signal or a line level . big difference in the signal strength


turn down the sends at channel and main send outs from mixer and if possible the input gain on the zoom.

if i guessed right your answer shall be some combo of those .

Post Reply