No sound from 1st Gen FX 32

This forum is for talking about all types of Peavey mixers.
Post Reply
S7usk
New Member
Posts: 1
Joined: Sun Oct 18, 2020 4:35 pm

No sound from 1st Gen FX 32

Post by S7usk » Sun Oct 18, 2020 4:44 pm

Hi
First gen FX32 with intermittent sound, can work for hours with no issues the no sound at all.
All signals going through but nothing out of the main output, it sometimes happens after 5-10 minuets of use, turn the power off then back on and its fine, dearly love the mixer dont really want to change it
Any suggestions?

jim h
Member
Posts: 657
Joined: Fri Sep 12, 2008 11:20 pm

Re: No sound from 1st Gen FX 32

Post by jim h » Mon Oct 19, 2020 8:30 am

This is an old, well known problem, with a solution.

The real problem is oxidation on the wire harness between the power supply and mixer circuitry. That in combination with an overly sensitive mute circuit causes exactly what you're describing.

If you search this forum, the recommended modification should be easy to find. If not, email me and I'll get it to you.

emaalva84
New Member
Posts: 1
Joined: Sat May 29, 2021 1:04 am

Re: No sound from 1st Gen FX 32

Post by emaalva84 » Sun May 30, 2021 12:26 pm

Hi guys. I have they same problem with fx24. I send an email Jim h. Sorry My English is poor.

jim h
Member
Posts: 657
Joined: Fri Sep 12, 2008 11:20 pm

Re: No sound from 1st Gen FX 32

Post by jim h » Thu Jun 03, 2021 10:07 am

Email has been sent.

Post Reply