Hello,
I am trying to figure out if there is a way to connect a Peavy MA 6150 Mixer Amplifier to a 3.5mm line in. There will be 5 mics going into the 6150 and played over speakers in an auditorium.
I am trying to see if I can get a dedicated feed of the mix of the 5 mics for a video livestream of the event. There is a "preamp out" on the back of the 6150, if I use adapters to get that signal to the 3.5mm, would that work? I do also have a zoom h4n I could use between the "preamp out" and the 3.5mm.
I am a video fella and don't have any experience with peavey gear. Trying to find a better solution then placing a mic in front of one of the speakers.
Any help would be appreciated. The manual for the 6150 is here - https://peavey.com/manuals/80301233.pdf
MA 6150T
This forum is for talking about all types of Peavey mixers.
-
- New Member
- Posts: 1
- Joined: Tue Sep 29, 2020 6:43 pm
Jump to
- Rules and Guidelines
- ↳ Peavey® Forum Rules
- General Discussion
- ↳ Club Peavey
- Amplifiers
- ↳ Guitar Amplifiers
- ↳ Vypyr & Sanpera
- ↳ Bass Amplifiers
- ↳ Keyboard Amplifiers
- Instruments
- ↳ Peavey Guitars
- ↳ Peavey Bass Guitars
- Pro Audio
- ↳ Speakers/Enclosures
- ↳ Power Amplifiers
- ↳ Mixers
- ↳ Processors/Effects
- ↳ VSX
- ↳ Microphones
- ↳ Latest News
- ↳ AmpKit Link
- ↳ XPort USB Guitar Interface
- ↳ Architectural Acoustics Club
- ↳ AA Mixers
- ↳ AA Modules
- ↳ AA Power Amplifiers
- ↳ AA Signal Processors
- ↳ AA Speakers/Enclosures
- ↳ ReValver Discussions
- ↳ ReValver Support
- ↳ ReValver Presets
- ↳ ReValver Mk II
- ↳ Pristine Sounds