XR800F mixer amp output fading
XR800F mixer amp output fading
Hi all, I have an old XR800F mixer amp. Just recently the output fades. I have just replaced main faders but still have problems. The main faders have no volume until at about 90-100 %. Input gains need to be high also. Any thoughts?
-
- Member
- Posts: 768
- Joined: Thu Sep 20, 2012 1:50 am
Re: XR800F mixer amp output fading
I don't know the answer to your question, but I suspect that the problem is not with the faders. It's likely some failing part of the circuitry. Call Peavey technicians at their repair center in Meridian. They can give you guidance and provide parts you need. The toll-free phone number is 877-732-8391.
You can email them at [email protected].
You can email them at [email protected].
Re: XR800F mixer amp output fading
There used to be a circuit that was used to mute turn on/off transients...in some of our older products this circuit used some high impedance parts that are subject to being affected by humidity.
I don't have a schematic handy or I'd point you in the right direction...or at least where I'd start.
I don't have a schematic handy or I'd point you in the right direction...or at least where I'd start.