XR8600D

This forum is for talking about all types of Peavey mixers.
Post Reply
bouncygown
New Member
Posts: 1
Joined: Tue Oct 01, 2024 4:45 am

XR8600D

Post by bouncygown » Tue Oct 01, 2024 4:47 am

I have an XR8600D and am having issues with the effects working sometimes. They work occasionally, but not always. I wanted to open it up and see if there was anything loose, such as a ribbon cable. I can't seem to locate how to open the case. I removed all of the screws surrounding the case to loosen the front and back panels, but the panels are wider than the case, so I'm not sure how they can come out. Any assistance will be highly appreciated. flappy bird

Thanks
JC

jim h
Member
Posts: 667
Joined: Fri Sep 12, 2008 11:20 pm

Re: XR8600D

Post by jim h » Wed Oct 02, 2024 9:34 am

There are two screws hidden under the feet.

archivistbegan
New Member
Posts: 1
Joined: Mon Oct 07, 2024 9:56 pm

Re: XR8600D

Post by archivistbegan » Mon Oct 07, 2024 9:58 pm

jim h wrote:
Wed Oct 02, 2024 9:34 am
There are two screws hidden under the feet.
Few people pay attention to their existence.

Post Reply