XR800F fader / slider knobs

This forum is for talking about all types of Peavey mixers.
Post Reply
captainmayhem
New Member
Posts: 3
Joined: Wed May 17, 2023 3:11 pm

XR800F fader / slider knobs

Post by captainmayhem » Wed May 17, 2023 3:28 pm

Hello, first time on this board and looking for a little info. I did try search engines and the product manual but no dice.

My XR800F is in good working order but has seen a lot in its time. It needs a new fader knob/cap and a new 16k frequency slider in the R/L+R section.

Where can I find the part numbers for these? Or failing that, suitable substitutes in terms of dimensions and looking fairly similar to the other knobs and sliders that are still on the mixer? I don't mind ordering non-Peavey parts as long as they work and fit.

Thanks.
20230517_211835.jpg
20230517_211835.jpg (657.92 KiB) Viewed 1322 times
20230517_211816.jpg
20230517_211816.jpg (708.77 KiB) Viewed 1322 times

captainmayhem
New Member
Posts: 3
Joined: Wed May 17, 2023 3:11 pm

Re: XR800F fader / slider knobs

Post by captainmayhem » Mon Jun 05, 2023 11:38 am

Guess nobody knows? (sorry for the bump).

jim h
Member
Posts: 657
Joined: Fri Sep 12, 2008 11:20 pm

Re: XR800F fader / slider knobs

Post by jim h » Tue Jun 06, 2023 9:21 am

Slider is p/n 31190123.

Fader Cap is 70902272.

I would call our parts department to confirm.

captainmayhem
New Member
Posts: 3
Joined: Wed May 17, 2023 3:11 pm

Re: XR800F fader / slider knobs

Post by captainmayhem » Fri Jun 09, 2023 12:37 pm

Ace, thank you!

Post Reply