peavey pv6 mixer high signal intensity

This forum is for talking about all types of Peavey mixers.
Post Reply
crownproductions
New Member
Posts: 1
Joined: Wed Oct 14, 2020 12:56 pm

peavey pv6 mixer high signal intensity

Post by crownproductions » Wed Oct 14, 2020 1:04 pm

Anyone else have this issue with this mixer? I use it to DJ and have my laptop into channel 1. My gain on that channel has to be all the way down, volume almost down as well because if not my powered speakers start to clip. What gives??

jim h
Member
Posts: 592
Joined: Fri Sep 12, 2008 11:20 pm

Re: peavey pv6 mixer high signal intensity

Post by jim h » Wed Oct 14, 2020 1:51 pm

What input connector are you plugged into? XLR? 1/4"?

Stryker57
Member
Posts: 912
Joined: Fri Aug 20, 2010 9:39 am
Location: Cincinnati,Ohio

Re: peavey pv6 mixer high signal intensity

Post by Stryker57 » Wed Oct 14, 2020 6:54 pm

also how hot is your input signal. can you turn it down and the gain up then? maybe input device around 1/2 if it has a volume knob?
and does pv6 channel one have a switch to pad incoming signals? some do

Post Reply