Help for XR 684F Powered Mixers connection

This forum is for talking about all types of Peavey mixers.
Post Reply
oofranckyoo
New Member
Posts: 2
Joined: Tue May 26, 2020 12:13 pm

Help for XR 684F Powered Mixers connection

Post by oofranckyoo » Tue May 26, 2020 12:27 pm

Hi Everybody,
I'am a new owner of XR 684F Powered Mixers and i have some questions to connect my speakers correctly.

Speakers are Peavey PRO 12 in 4 ohms

In the technical documentation i can read :
peavey.png
peavey.png (106.92 KiB) Viewed 2710 times
My question is : can i connect in right/main and monitor mode, one speaker in 4 ohms in one outpout of right canal and the second one in 4 ohms in the other outpout of the right canal and use left canal for monitor ?

I'am not sur that the impedance will be ok ?

Thank you for your support
Franck

User avatar
Enzo
Member
Posts: 9535
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: Help for XR 684F Powered Mixers connection

Post by Enzo » Tue May 26, 2020 4:09 pm

The pairs of speaker jacks are wired together inside. Each pair is good down to 4 ohms. If you have two 4 ohm speakers, and plug them both into right (or left) then that makes a 2 ohm load on the amp. DO not do that.

oofranckyoo
New Member
Posts: 2
Joined: Tue May 26, 2020 12:13 pm

Re: Help for XR 684F Powered Mixers connection

Post by oofranckyoo » Wed May 27, 2020 1:58 am

Thank you for your quick and clear answer !!

Post Reply