Need help with Peavey XR-700 Thank You.

This forum is for talking about all types of Peavey mixers.
Post Reply
madscientistx
New Member
Posts: 2
Joined: Sun May 17, 2020 4:38 pm

Need help with Peavey XR-700 Thank You.

Post by madscientistx » Sun May 17, 2020 4:41 pm

my Buddy has a Peavey XR-700 and sent me a photo of a burnt resistor, I have had 0 luck finding out what the resistor is , if anyone knows the value of this resistor, or has a photo of this part of the board I would greatly appreciate it. Thank You.
Attachments
97342262_589752594986031_6100010980991827968_n.jpg
97342262_589752594986031_6100010980991827968_n.jpg (197.01 KiB) Viewed 132 times

User avatar
Enzo
Member
Posts: 8858
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: Need help with Peavey XR-700 Thank You.

Post by Enzo » Mon May 18, 2020 3:30 pm

Contact customer service at Peavey and ask for the XR700 schematic file. I don't have it scanned and my paper copy is in storage. it will include the parts layout. That will let you identify which resistor it is, then look on the schematic for its value.

RESISTORS DO NOT BURN OUT ON THEIR OWN. Something else is going to be bad there.


Look at your photo. Is there not an identical board just to the left of this one? Look on that one to identify the part.

madscientistx
New Member
Posts: 2
Joined: Sun May 17, 2020 4:38 pm

Re: Need help with Peavey XR-700 Thank You.

Post by madscientistx » Mon May 18, 2020 5:19 pm

Thank You.

Post Reply