Peavey Messenger UL 215S Good amp to use?

This forum is for talking about all kinds of Peavey power amplifiers.
Post Reply
philmguitar
Member
Posts: 37
Joined: Sun Sep 04, 2011 3:27 pm

Peavey Messenger UL 215S Good amp to use?

Post by philmguitar » Sun Jan 29, 2023 2:39 pm

Any recommendations for a good amp to power the following subs?
Peavey Messenger UL 215S
1000 Watts RMS continuous, 2000 Watts program.
4 Ohms.
* Two 15'' (381mm) BlackWidow®, cast frame with field-replaceable basket.
* Frequency response: 48 Hz - 1 kHz.
* Efficiency: 101dB.
* Two Neutrik® Speakon® connectors.
* Bi-amp operation only.
* Black Hammer Head™ polyurea coating.
* Reversible foam/metal grille allowing 2 different facias.
* Satellite pole mounting.
* Lightweight poplar plywood construction.
* Made in the UK.

Bartman
Member
Posts: 600
Joined: Fri Sep 19, 2008 11:15 am

Re: Peavey Messenger UL 215S Good amp to use?

Post by Bartman » Mon Jan 30, 2023 9:13 am

Anything that puts out 1,500 watts or so at 4 ohms would work well.

philmguitar
Member
Posts: 37
Joined: Sun Sep 04, 2011 3:27 pm

Re: Peavey Messenger UL 215S Good amp to use?

Post by philmguitar » Mon Jan 30, 2023 11:02 am

Bartman wrote:
Mon Jan 30, 2023 9:13 am
Anything that puts out 1,500 watts or so at 4 ohms would work well.
Thank you, I was thinking along those lines needed some reassure

philmguitar
Member
Posts: 37
Joined: Sun Sep 04, 2011 3:27 pm

Re: Peavey Messenger UL 215S Good amp to use?

Post by philmguitar » Mon Jan 30, 2023 11:04 am

Bartman wrote:
Mon Jan 30, 2023 9:13 am
Anything that puts out 1,500 watts or so at 4 ohms would work well.
* reassurance.

Post Reply