Hello
I've got a schematic for this amp pv2000, though connections of the main transformer is missing.
I have a problem, I had to replace twice the 7815 regulator, on investigating, I have found that I have a resistance of about 65 ohm between the ground of the regulator, and the ground of the amplifier.
the resistors between +v15 to ground and -v15 to ground were burnt, and replaced (47 ohms each), I suspect there is a potential between grounds, making the regulator smoke.
any hint will be appreciated
thanx
Help on PV2000
This forum is for talking about all kinds of Peavey power amplifiers.
Jump to
- Rules and Guidelines
- ↳ Peavey® Forum Rules
- General Discussion
- ↳ Club Peavey
- Amplifiers
- ↳ Guitar Amplifiers
- ↳ Vypyr & Sanpera
- ↳ Bass Amplifiers
- ↳ Keyboard Amplifiers
- Instruments
- ↳ Peavey Guitars
- ↳ Peavey Bass Guitars
- Pro Audio
- ↳ Speakers/Enclosures
- ↳ Power Amplifiers
- ↳ Mixers
- ↳ Processors/Effects
- ↳ VSX
- ↳ Microphones
- ↳ Latest News
- ↳ AmpKit Link
- ↳ XPort USB Guitar Interface
- ↳ Architectural Acoustics Club
- ↳ AA Mixers
- ↳ AA Modules
- ↳ AA Power Amplifiers
- ↳ AA Signal Processors
- ↳ AA Speakers/Enclosures
- ↳ ReValver Discussions
- ↳ ReValver Support
- ↳ ReValver Presets
- ↳ ReValver Mk II
- ↳ Pristine Sounds