Peavey ipr 3000 amps

This forum is for talking about all kinds of Peavey power amplifiers.
Post Reply
Larrylee
New Member
Posts: 1
Joined: Tue Sep 15, 2020 7:35 pm

Peavey ipr 3000 amps

Post by Larrylee » Tue Sep 15, 2020 7:46 pm

i have 2 ipr3000 amplifiers I need to link together to my mixer and I was wondering if you have a diagram or information on how these connections can be made? And also what cables do I need?
Thanks

colliedogboy1
Member
Posts: 768
Joined: Thu Sep 20, 2012 1:50 am

Re: Peavey ipr 3000 amps

Post by colliedogboy1 » Mon Sep 21, 2020 9:19 pm

Not sure what you mean by "link together". You would not want to link the two power amps to each other, so I assume you mean you want to connect the amps to the outputs of the mixer. Depending on what setup you want, there are several options open to you. You could connect one amp to your mixer's "Main" outputs to power your main speakers, while connecting your mixer's "Monitor" outputs to the other amp to power your monitor speakers. This is assuming that ALL your speakers are "unpowered" speakers. Depending on the power-handling capacity of your speakers, you might connect one speaker to each speaker output of your amp (side A and side B), or even two speakers to each side if your speakers are not that potent. You need to send more information on what setup you are aiming for.

Post Reply