i have 2 ipr3000 amplifiers I need to link together to my mixer and I was wondering if you have a diagram or information on how these connections can be made? And also what cables do I need?
Thanks
Peavey ipr 3000 amps
-
- Member
- Posts: 768
- Joined: Thu Sep 20, 2012 1:50 am
Re: Peavey ipr 3000 amps
Not sure what you mean by "link together". You would not want to link the two power amps to each other, so I assume you mean you want to connect the amps to the outputs of the mixer. Depending on what setup you want, there are several options open to you. You could connect one amp to your mixer's "Main" outputs to power your main speakers, while connecting your mixer's "Monitor" outputs to the other amp to power your monitor speakers. This is assuming that ALL your speakers are "unpowered" speakers. Depending on the power-handling capacity of your speakers, you might connect one speaker to each speaker output of your amp (side A and side B), or even two speakers to each side if your speakers are not that potent. You need to send more information on what setup you are aiming for.