IPR2 3000 wont power on

This forum is for talking about all kinds of Peavey power amplifiers.
Post Reply
Glenn654
New Member
Posts: 2
Joined: Tue Aug 27, 2019 9:53 pm

IPR2 3000 wont power on

Post by Glenn654 » Tue Aug 27, 2019 10:00 pm

Have an IPR2 3000 that won't power on.

Went to turn our system on today, when I opened the door to the sound room one of our 3000s was lit up blue like normal and powered up when I pressed the power button.

The other wasn't lit up blue, upon closer inspection there was a very dim blue lit up in it.

I tried unplugging it for a while to see if it needed to reset, made sure the plugs were securely in, also felt on the back for a possible tripped breaker but nothing.

Any ideas?

colliedogboy1
Member
Posts: 768
Joined: Thu Sep 20, 2012 1:50 am

Re: IPR2 3000 wont power on

Post by colliedogboy1 » Thu Aug 29, 2019 6:01 pm

Are they both plugged into the same circuit? Could one circuit breaker be tripped?

Glenn654
New Member
Posts: 2
Joined: Tue Aug 27, 2019 9:53 pm

Re: IPR2 3000 wont power on

Post by Glenn654 » Mon Sep 02, 2019 4:09 pm

They are both on same circuit.

It is getting power to the amp itself as there is a dim blue backlight but not as bright as the other one when powered off.

User avatar
Wooferhound
Member
Posts: 1249
Joined: Sun Jun 20, 2010 11:02 pm
Location: Huntsville Alabama USA
Contact:

Re: IPR2 3000 wont power on

Post by Wooferhound » Sat Sep 14, 2019 9:43 am

When those power amps are Switched Off, they will still glow blue
Try operating the power switch on the front panel
----- W o o f e r h o u n d -----

Post Reply