I've got an old CS 400 (CS-400 Power Pak) that works great, with the exception of a wonky power switch (it sticks, and the power lamp does not come on).
I've found CS 800 power switches for sale online. Would that work as a direct replacement? If not, does anyone have a recommendation for how to get a suitable replacement?
Thanks!
OccamsShaver
old CS 400 - replacement power switch?
-
- New Member
- Posts: 3
- Joined: Thu Feb 07, 2019 10:32 am
Re: old CS 400 - replacement power switch?
Hope you've found a replacement. If not, I would pull it out and check the specs on the side. Any switch that is the same type, of same or greater rating (current and voltage), with the same hole size would work.
-
- New Member
- Posts: 3
- Joined: Thu Feb 07, 2019 10:32 am
Re: old CS 400 - replacement power switch?
Thanks, Jefflaf. I have not replaced it yet. I did pull off the secondary plastic cover, which seems to help with the switch movement a bit. I could not find a switch with the 6 terminals online.
Re: old CS 400 - replacement power switch?
Try CALLING the parts department at Peavey.
-
- New Member
- Posts: 5
- Joined: Sun Jan 19, 2020 7:56 pm
Re: old CS 400 - replacement power switch?
i just found the right switch on ebay.
keep in mind with these switches two legs opposite the copper legs that are for the light itself.
i could not find this switch new anywhere, but i didn't check with Peavey
keep in mind with these switches two legs opposite the copper legs that are for the light itself.
i could not find this switch new anywhere, but i didn't check with Peavey
-
- New Member
- Posts: 1
- Joined: Sun May 29, 2022 2:08 pm
Re: old CS 400 - replacement power switch?
Does any one know where I can purchase the replacement power switch for a Peavy CS 400C? Its an Arrow England 2600R11E.
-
- New Member
- Posts: 3
- Joined: Thu Feb 07, 2019 10:32 am
Re: old CS 400 - replacement power switch?
Here's what I bought and installed:
https://www.amazon.com/gp/product/B07MV ... UTF8&psc=1
I paid $8 for two of them. All it took was some slight filing of the switch opening for it to accommodate the expanding sides of the replacement switch.
https://www.amazon.com/gp/product/B07MV ... UTF8&psc=1
I paid $8 for two of them. All it took was some slight filing of the switch opening for it to accommodate the expanding sides of the replacement switch.