PMA 200
Re: PMA 200
I would strongly recommend against posting autotranslated content, particularly when it does not match the forum's principal language. For better or worse, this is an English-speaking forum and most readers and writers will be accustomed to the English language.
Autotranslations tend to be bad, and multiple translations back and forth tend to be outright horrible. So if you post something autotranslated from English (or anything else) into Spanish, and the usual reader has to autotranslate it back into English, it becomes a lot less comprehensible than if it had been kept in English in the first place.
It is better to stay in English and possibly include a pointer to an autotranslator. Or at the very least post both original and autotranslated content so that a reader accustomed with the untranslated language has a chance to revert to the less molested version.
Autotranslations tend to be bad, and multiple translations back and forth tend to be outright horrible. So if you post something autotranslated from English (or anything else) into Spanish, and the usual reader has to autotranslate it back into English, it becomes a lot less comprehensible than if it had been kept in English in the first place.
It is better to stay in English and possibly include a pointer to an autotranslator. Or at the very least post both original and autotranslated content so that a reader accustomed with the untranslated language has a chance to revert to the less molested version.
Re: PMA 200
Hello, I bought a used Peavey PMA 200 amplifier, I wanted to know if anyone has the electrical schematic. Thank you, best regards.
- studiodtk5
- Member
- Posts: 2240
- Joined: Sat Feb 20, 2010 1:39 pm
- Location: Toledo, Ohio
Re: PMA 200
This is a power amp I always wanted to get for my studio. I am and have been using an AB International amp for years. Sadly they are no longer in business.
Any users of this amp want to give any information on the amp, please chime in.
Any users of this amp want to give any information on the amp, please chime in.
Darren
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...
Re: PMA 200
Hello, I appreciate all the opinions. I am very impressed with the sound of this amp. In my country the electrical network is 220v 50hz, that's why I wanted to get the technical manual, to be able to transform it in the best way, I don't like to use a 220v to 110v transformer. Greetings
Re: PMA 200
Try asking at [email protected] and/or calling service at business hours. That may not end up the fastest or most reliable way because of overwork, but if you manage to get through, they usually are helpful with schematics.