Bi-amping with crossovers

This forum is for talking about all kinds of Peavey power amplifiers.
Post Reply
Restlesstj
New Member
Posts: 1
Joined: Thu Jan 13, 2022 12:56 pm

Bi-amping with crossovers

Post by Restlesstj » Thu Jan 13, 2022 1:32 pm

Could someone please help me set up a stereo biamping system. I have a cs400 and cs800 both are from the 1980's. I am using a Tascam M-312 mixing board which gives me the option of sending a balance or unbalance signal to the power amp with either XLR or 1/4. My speakers are: for the subs I am using JBL E-140'S and my mids and highs are Altec lancing 1202 voice of the theater cabinets with a built-in crossover at 800hz. I have the following crossovers 1-PL-1200, 1-PL-1200E.Q. 2- PL-500, and 1-PL-150. I also have an Electro-voice EX-18 rack mount electronic crossover. I am missing the dust covers on the back of the cs800 for the crossover plug in. Could someone please tell me how to wire this up the best way to have a stereo biamp system. Thank you in advance for your help.

Post Reply