my PV12 power amp

This forum is for talking about all kinds of Peavey power amplifiers.
Post Reply
ArtMorgan
New Member
Posts: 2
Joined: Sat Oct 10, 2015 8:29 am

my PV12 power amp

Post by ArtMorgan » Sun May 24, 2020 7:01 pm

I HAVWE A QUESTION ABOUT MY PV112 POWER AMP i JUST BOUGHT. ON THE BACK THERE IS 4 OUPUT JACKS 2 FOR EACH CHANNEL. IF I CONNECT 4 4OHMS SPEAKER TO IT ONE ONE EACH CHANNEL WOULD THAT GIVE ME A TOTAL OF 2 OHMS FOR THE AMP.

Dookie
Member
Posts: 809
Joined: Fri Oct 10, 2008 5:09 pm
Location: Maine USA

Re: my PV12 power amp

Post by Dookie » Thu May 28, 2020 2:41 pm

I know of a Peavey 112 speaker but not a Peavey 112 power amp. Could you post a link to your amp?
Doug

colliedogboy1
Member
Posts: 761
Joined: Thu Sep 20, 2012 1:50 am

Re: my PV12 power amp

Post by colliedogboy1 » Thu Jun 18, 2020 9:16 pm

Whatever amp you have, it is apparently a stereo amp. So, yes, two 4ohm speakers into each side of a stereo amp will give you a 2ohm load into each side and a total of 2ohms load for the entire amp.

Post Reply