I have a pair of SP1's, obviously purchased used, and the crossover connectors need to be replaced - they are intermittent and the low frequency Biamp connector was destroyed during the process of separating the board from the module. I've looked at a schematic and determined these are 3 conductor jacks that have a pair of circuits that open when a plug is inserted. Does anyone have a source for this part or is it something I could order from Peavey. I would not mind covering all of these to SpeakON if it were easily done.
Additionally I would like to know the color code used with the internal wiring. I know that I can match up connectors on the drivers with the connectors on the crossover, but would like to put things back the way they were ORIGINALLY wired, it possible.
SP1 Crossover parts help
SP1 Crossover parts help
More is better - Most is best - Saturation is what I shoot for.
-- KloneMan --
-- KloneMan --