SP5G daisy chain

This forum is for discussions on all kinds of Peavey speakers and enclosures.
Post Reply
lastshooter
Member
Posts: 10
Joined: Tue May 10, 2022 4:35 pm

SP5G daisy chain

Post by lastshooter » Tue May 10, 2022 4:43 pm

Can the SP5G speakers be daisy chained? The x-overs have two full range 1/4 inch inputs.(parallel)
I will using them on the main output of the PVi 6500 powered mixer along with PVi 10 floor monitors from the monitor output of the mixer.
All speakers are 8 ohms.
The PVi 10 x-overs have the input and through so no issue there. Wattage should be fine as ran at low volumes.
Thanks!

User avatar
Enzo
Member
Posts: 9535
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: SP5G daisy chain

Post by Enzo » Tue May 10, 2022 8:46 pm

Parallel twin jacks on full range do allow daisy chain connections at full range. Two 8 ohm cabs thus connected will result in a 4 ohm load on the amp.

lastshooter
Member
Posts: 10
Joined: Tue May 10, 2022 4:35 pm

Re: SP5G daisy chain

Post by lastshooter » Wed May 11, 2022 7:00 am

Thanks!
Best to ask than fry!
And power mixer allows for 4 8 ohm speakers🙃

Post Reply