Can the SP5G speakers be daisy chained? The x-overs have two full range 1/4 inch inputs.(parallel)
I will using them on the main output of the PVi 6500 powered mixer along with PVi 10 floor monitors from the monitor output of the mixer.
All speakers are 8 ohms.
The PVi 10 x-overs have the input and through so no issue there. Wattage should be fine as ran at low volumes.
Thanks!
SP5G daisy chain
Re: SP5G daisy chain
Parallel twin jacks on full range do allow daisy chain connections at full range. Two 8 ohm cabs thus connected will result in a 4 ohm load on the amp.
-
- Member
- Posts: 10
- Joined: Tue May 10, 2022 4:35 pm
Re: SP5G daisy chain
Thanks!
Best to ask than fry!
And power mixer allows for 4 8 ohm speakers
Best to ask than fry!
And power mixer allows for 4 8 ohm speakers