Need to rewire my new 6505 cabinet.
Removed all the screws from the rear panel. It will not budge.
Anybody know if they glued these cabinets shut?
6505 Slant 4x12 Rear panel
Re: 6505 Slant 4x12 Rear panel
Probably just stuck tolex. No they didn't glue them shut.
-
- New Member
- Posts: 5
- Joined: Thu Jun 11, 2020 1:49 pm
Re: 6505 Slant 4x12 Rear panel
Alright, Thank you sir.
I'll give it try again tomorrow. Maybe able to reach through the jack plate
and tap on it with a rubber mallet from the inside.
Appreciate it.
I'll give it try again tomorrow. Maybe able to reach through the jack plate
and tap on it with a rubber mallet from the inside.
Appreciate it.
-
- New Member
- Posts: 5
- Joined: Thu Jun 11, 2020 1:49 pm
Re: 6505 Slant 4x12 Rear panel
Another quick thanks, Enzo.
Took a bit of prying with a screw driver on the inside, but finally broke
the Tolex loose. Appreciate the help so I wouldn't wreck the cab.
Took a bit of prying with a screw driver on the inside, but finally broke
the Tolex loose. Appreciate the help so I wouldn't wreck the cab.