6505 Slant 4x12 Rear panel

This forum is for discussions on all kinds of Peavey speakers and enclosures.
Post Reply
SterlingNOVA
New Member
Posts: 5
Joined: Thu Jun 11, 2020 1:49 pm

6505 Slant 4x12 Rear panel

Post by SterlingNOVA » Mon Mar 08, 2021 8:49 pm

Need to rewire my new 6505 cabinet.

Removed all the screws from the rear panel. It will not budge.
Anybody know if they glued these cabinets shut?

User avatar
Enzo
Member
Posts: 9089
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: 6505 Slant 4x12 Rear panel

Post by Enzo » Mon Mar 08, 2021 9:07 pm

Probably just stuck tolex. No they didn't glue them shut.

SterlingNOVA
New Member
Posts: 5
Joined: Thu Jun 11, 2020 1:49 pm

Re: 6505 Slant 4x12 Rear panel

Post by SterlingNOVA » Mon Mar 08, 2021 9:14 pm

Alright, Thank you sir.
I'll give it try again tomorrow. Maybe able to reach through the jack plate
and tap on it with a rubber mallet from the inside.
Appreciate it.

SterlingNOVA
New Member
Posts: 5
Joined: Thu Jun 11, 2020 1:49 pm

Re: 6505 Slant 4x12 Rear panel

Post by SterlingNOVA » Wed Mar 10, 2021 7:09 pm

Another quick thanks, Enzo.
Took a bit of prying with a screw driver on the inside, but finally broke
the Tolex loose. Appreciate the help so I wouldn't wreck the cab.

Post Reply