This forum is for discussions on all kinds of Peavey speakers and enclosures.
4 posts • Page 1 of 1
Having issues with my Ln1263 system. I gig 3-4 times per week. I ve had this system less then a year. I do like it, however I ve been having intermittent issues where one or both of the satellite speaker fail to work… after shutting it down several times or taking the speakers off the pole,and then putting back together It will work properly. On occasion I ve had one of the speakers cut out when running in stereo and connected with the optional cables for stereo operation. My latest issue at a gig, I set up , went to sound check and only had sound from sub. Nothing I did would produce sound from the satellite speakers. I lost money and had to cancel my gig. I set everything back up at home and same issue. My next step I turned the sub down to 0. Set the speakers up in stereo mode on stand . Brought the volume up and then it produced sound from the satellite speakers. I brought the volume up on sub and it worked. Is anyone else having these issues? Not sure what’s causing this… any solutions or feedback would be appreciated. I agree with some previous user comments, the manual is very general, there is not much literature or tips that I can find on line. Not sure if the amp is a problem or maybe the software? Firmware? Please need help
Even with the provide cables same issue… I can get everything working but I have to do the described method I mentioned. My worry is at some point that it won’t work at all. I m wondering if a cross over or something could be the culprit … since I do get sub volume… and then have a break through where the satellite speakers seem to “awaken”… anyone??