I this a stock T-40 bass and case

This forum is for discussions on all kinds of Peavey basses.
Post Reply
[email protected]
New Member
Posts: 1
Joined: Thu Feb 10, 2022 12:55 pm

I this a stock T-40 bass and case

Post by [email protected] » Sat Feb 12, 2022 5:06 pm

I was going to sell my T-40 because I have so many basses along with my Peavey mark III amp. I was told by this guy who claimed to be a peavey T-40 expert that my case was not the original case and that someone shave the body. In my limited checking I don't think he is correct. So I thought I would check on here.
Attachments
IMG_2672.JPG
IMG_2672.JPG (1.94 MiB) Viewed 3146 times
IMG_2671.JPG
IMG_2671.JPG (1.91 MiB) Viewed 3146 times
IMG_2668.JPG
IMG_2668.JPG (1.94 MiB) Viewed 3146 times
IMG_2673.JPG
IMG_2673.JPG (1.9 MiB) Viewed 3146 times
IMG_2670.JPG
IMG_2670.JPG (1.86 MiB) Viewed 3146 times

cblub1
New Member
Posts: 2
Joined: Fri Feb 18, 2022 2:51 pm

Re: I this a stock T-40 bass and case

Post by cblub1 » Fri Feb 18, 2022 3:24 pm

Yes, this is a stock Peavey T40 bass. One of the earlier ones. I own one from this era. It appears the "expert" may be correct though, that the body was shaved down a little more on the forearm contour area for comfort. My T40 from this era has a more gradual and only slight contour and actually digs into my forearm because it is not as pronounced as your T40. I could be wrong about this. I'm judging it like this because the coloring (or supposed wear) of the wood in that exact area (where it seems a little more extreme to me) is so defined with a nice straight edge to the contour area. I would probably consider doing the same to my T40 because that is one of the few things that bothers me about my T40 is that it lacks a forearm contour and digs into my arm when I sit and play it for more than 20-30 min. That honest bothers me more than the weight.

The case certainly looks original. I have seen these olive green lined cases with several T40's over the years and if you do some searches, you will find pics of Peavey T40's from this era having this case. I've seen this case with too many T40's from the early era for it to be a coincidence. I remember reading it was a possible transition case from the original, square, modeled plastic case (with the rust colored interior and peavey amp logo on front) to the chainsaw type case with built in handle later on. Or it was one of the first cases used before they contracted with their first case maker. I think there was also a blue lined case as well at one point.

cblub1
New Member
Posts: 2
Joined: Fri Feb 18, 2022 2:51 pm

Re: I this a stock T-40 bass and case

Post by cblub1 » Fri Feb 18, 2022 4:37 pm

Didn't try very hard to find this. Looks just like your case.
Attachments
peaveyt40nat1.jpg
peaveyt40nat1.jpg (247.5 KiB) Viewed 3133 times

CGremlin
Member
Posts: 41
Joined: Fri Feb 13, 2015 11:15 pm

Re: I this a stock T-40 bass and case

Post by CGremlin » Wed Mar 02, 2022 8:10 pm

Looks like it's been contoured a bit to give the player's right arm more comfort, and judging from the case, it's probably a 1979. Peavey used the black Fender-type cases with the yellow-green lining from late '78 through '79 as a brief intermediate solution during the switch from the the original copper-lined rectangular vacuformed cases to the more common (and much more durable) brown-lined teardrop style.

I'd like to get a '79 with that case. All of my T-40s and T-60s are early ones with those hideous rectangular cases.

Post Reply